Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Mar 2010
    Location
    rogersville
    Posts
    728

    anyone running a hydraulic jackplate on zx's???

    wondering if a hyd plate would give me any better performance on my 07 zx225?

  2. Member
    Join Date
    Oct 2007
    Location
    Eagletown
    Posts
    119
    #2

    Re: anyone running a hydraulic jackplate on zx's??? (buttermilkbiscuit)

    Well i can't see where a Hyd. jp would give any better performance than a manual jp. now you can get better handling performance in several areas at once. You can have the best top end performance and better handling performance by moving a hyd. to the best spot for that situation. So what are you trying to accomplish?



  3. Moderator blackknife's Avatar
    Join Date
    Feb 2008
    Location
    Smithfield, RI
    Posts
    2,993
    #3

    Re: anyone running a hydraulic jackplate on zx's??? (bass-coach)

    real shallow water is where a hydraulic comes in handy. I'd love to have one, but the cost far outweighs the benefits for me

  4. Member
    Join Date
    Dec 2004
    Location
    Lynnwood
    Posts
    189
    #4

    Re: anyone running a hydraulic jackplate on zx's??? (buttermilkbiscuit)

    I just put a hydraulic on my zx... I can't believe how sweet it is. Top end? Yes and no. Pound for pound you won't get any faster "EXCEPT" you will be able to adjust for load differences and then you will be faster when say your livewells are full and you can drop it a quarter inch or whatever you need. Now if you go for a modified surface running prop you will be faster for sure. With a fixed plate it's hard to run these as you tend to blow out trying to get on plane but with a hydraulic you get the best of both. I went for an extra inch (13 total) and it handles and jumps out of the hole better. Also with a hydraulic you will love it in rough water. Just drop it all the way and see how well you stick to the water and reduce your bouncing... it's really sweet. I'd hands down recommend it for anyone.

  5. Member
    Join Date
    Mar 2010
    Location
    rogersville
    Posts
    728
    #5

    Re: anyone running a hydraulic jackplate on zx's??? (JohnPZX)

    what brand plate are you running?

    What's the top speed on your boat?

Similar Threads

  1. Hydraulic Jackplate
    By colreb2000 in forum Stroker Boats
    Replies: 8
    Last Post: 05-06-2011, 04:21 PM
  2. Hydraulic jackplate
    By stratos285sc in forum Stratos/Javelin Boats
    Replies: 1
    Last Post: 01-16-2011, 01:37 PM
  3. New hydraulic jackplate
    By jbasslouie in forum Cobra Boats
    Replies: 2
    Last Post: 04-06-2010, 03:41 PM
  4. Hydraulic Jackplate or Not????
    By MadBass in forum Stratos/Javelin Boats
    Replies: 5
    Last Post: 12-09-2007, 05:16 PM
  5. Replacing manual Jackplate for Hydraulic Jackplate
    By MichAngler in forum Skeeter Boats
    Replies: 6
    Last Post: 10-09-2006, 06:51 AM