Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Mar 2008
    Location
    Lexington
    Posts
    79

    Loose Wire VMAX150

    Hello, looking for some help with a loose wire. About half way down the motor on the right inner side is a wire that connects back to the motor running upwards. I think its a ground wire and it has a round circle end. The screw that holds it backed out and I found a spring in the whole. Anyone know what the wire goes to or the part number for the screw. The motor runs and cranks fine so i'm not sure what the wire could be to.

    Thanks
    Thomas

  2. Skeeter Boats/Missouri Club Moderator Rodney Bledsoe's Avatar
    Join Date
    May 2006
    Location
    Peculiar, Missouri
    Posts
    30,510
    #2

    Re: Loose Wire VMAX150 (TommyT001)

    Thomas if your able to get a picture of it I think it'll be easier for us to figure out.

  3. Member
    Join Date
    Jan 2006
    Location
    Ottawa, Ontario, Canada
    Posts
    1,350
    #3

    Re: Loose Wire VMAX150 (Rodney Bledsoe)

    I was going to say the same but expected to see an answer by the time i asked

    snap a pic if you can pointing to the wire and i'm sure someone will have a better idea.

    Current: 2006 ~ 20i ~ 250 HPDI ~ T1-25p
    Previous: 2005 ~ ZX 225 ~ 250 HPDI Phase III - TXP 26p

  4. Member
    Join Date
    Mar 2008
    Location
    Lexington
    Posts
    79
    #4

    Re: Loose Wire VMAX150 (TommyT001)



    and



    first time posting photos, hope this works


    Thanks
    Thomas

  5. Lowrance/Garmin/GPS Moderator fishin couillon's Avatar
    Join Date
    Jun 2004
    Location
    Pineville, La
    Posts
    34,397
    #5

    Re: Loose Wire VMAX150 (TommyT001)

    Looks like a ground wire. When i get home this evening and no one has figured it out i can look at mine and tell you where it connects.
    YOU are not entitled to what I have earned!!!!!

    2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS

  6. Member
    Join Date
    Jun 2004
    Location
    Deerfield Beach
    Posts
    688
    #6

    Re: Loose Wire VMAX150 (fishin couillon)

    Looks like a ground strap that I have mounted underneath a zerks grease fitting. Here is a picture on a 2000 150 OX-66.


Similar Threads

  1. zx190 vmax150
    By mbroussard in forum Skeeter Boats
    Replies: 12
    Last Post: 07-19-2009, 01:39 PM
  2. yamaha vmax150 boggs down when on plane
    By lesaug in forum Yamaha Motors
    Replies: 6
    Last Post: 06-08-2009, 12:31 PM
  3. Loose Wire? 2007 VMAX 250 2 stroke.
    By Boudreaux99 in forum Yamaha Motors
    Replies: 1
    Last Post: 02-22-2009, 05:07 PM
  4. Service manual for a 2004 VMAX150
    By rlovell in forum Yamaha Motors
    Replies: 8
    Last Post: 05-04-2008, 01:55 AM
  5. Choke on VMAX150 carb
    By fishin couillon in forum Yamaha Motors
    Replies: 5
    Last Post: 03-19-2007, 05:51 PM