Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Jan 2010
    Location
    kingston, ontario
    Posts
    40

    1988 skeeter adding a kill switch ?

    i am looking to add a kill switch to my boat, any one know how to do this ?? and where to get the stuff for it ?
    thanks, would add pictures but dont know how too...

  2. BBC SPONSOR
    Join Date
    Nov 2005
    Location
    Nicholasville, KY
    Posts
    1,132
    #2

    Re: 1988 skeeter adding a kill switch ? (shxxx)

    Give my service tech a call tomorrow and he can tell what you will need to do it. Thanks 859-881-5266
    Chris Conley
    Internet Sales Mgr.
    Anglers Outpost & Marine
    http://www.anglersoutpost.com
    859-421-3038

  3. Member Skeet'r89's Avatar
    Join Date
    Jun 2004
    Location
    North East, Top of the BAY, MD.
    Posts
    7,271
    #3

    Re: 1988 skeeter adding a kill switch ? (shxxx)

    Are you sure that there is not a kill switch already there. Does it have a Merc motor? If so look at the throttle control lever. On the back lower corner there should be a small toggle switch. A lanyard loop will slip over this. Pulling the lanyard will flip the switch and kill the motor.
    Larry Fitzgerald
    2024 Tracker V-175 /115 Merc
    2021 Silverado/ 4 Banger

  4. Member
    Join Date
    Jan 2010
    Location
    kingston, ontario
    Posts
    40
    #4

    Re: 1988 skeeter adding a kill switch ? (Skeet'r89)

    oh, i will have to look for that, thanks,

Similar Threads

  1. Replies: 2
    Last Post: 03-03-2012, 08:11 AM
  2. Replies: 8
    Last Post: 09-16-2008, 11:18 AM
  3. Adding a kill switch to a 1977, 25 hp Evinrude
    By ProcraftMike in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 05-05-2008, 10:41 AM
  4. Kill Switch
    By DHunter68 in forum Stratos/Javelin Boats
    Replies: 2
    Last Post: 04-03-2006, 01:13 PM
  5. 96 150 Intruder ignition switch kill switch?
    By StratosDadRI in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 01-21-2006, 01:51 PM