Anyone put a trolling motor tray in the deck of a SX200? Looking to do it and wondering if there was anything you ran into during installation that caused problems.
Also, in looking at the different types, do you favor the plastic, fiberglass, or aluminum versions? What are the pros/cons to them?
Thanks in advance!
There is a new sponsor on here that makes them in fiberglass and can match the color of your boat. Might them out also. I would imagine if built correct the fiberglass would hold up like the metal. After all the ones that are built in are fiberglass. I would like this one cause it can match your boat.
http://www.bbcboards.net...motor
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
I installed one in my 03 sx200 with no problems except making that first hole. You can pull the dry box out to look under there to insure no wires are in he way but there should not be. Meassure twice cut once. Good luck
2003 SX200 Skeeter / Yamaha 3.1 200 OX 66
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by setdahook »</TD></TR><TR><TD CLASS="quote"> Meassure twice cut once. Good luck</TD></TR></TABLE>
Damn.....you only measured twice? I was so nervous I must have measured 15 or 20 times!!!
Reply With Quote