Livewell Problem ZX200

[Skeeter32]

I realized that my port side livewell is not holding water. I had a pump changed back in the winter when the boat was interized and I was wondering how the dial next to the driver seat controls the livewell open and close. Is it some sort of a cable? I am wondering if something was disconnected when they worked on the pump.

[Ron S]

That would be my guess. If you go to flowright they have a good diagram of how ever thing works.

http://www.flow-rite.com/marine/

[Skeeter32]

thanks

[mnlong]

You may have a bad valve. I had to replace mine, you can order them from flow-rite or order the kit and rebuild them. They are in the well next to bilge pumps.

[mnbassman]

I agree with the valve. Mine was doing the same thing and the valves had to be replaced.
I believe the guy had to take my gas tank out and everything to get to them.

[Neilslure]

I had a cable loose on my Stratos that caused the livewell to hold water, it was loose at the valve in the bilge.