Need Some help on this

[macinckirk]

Here is a link to my problem and pics


http://www.bbcboards.net...-this

Looking for some help on who to talk to about this

[Tagg007]

I would be calling Skeeter.

[macinckirk]

I'm getting the round around allready

[AdamG]

Gorilla Glue

[Neilslure]

Posted in other thread.

[macinckirk]

Thanks Neil

[fishin couillon]

I would think skeeter would say to contact the trailer mfgr. I had a problem with my trailer before and dealt directly with EZ. Was a lot easier being i knew what was going on. Now they were a little slow in the email end so i had to make phone calls instead.

[Doug Vahrenberg]

First step is talking to your dealer - have them contact their reps and manufacturers. That is the normal chain of command. If you don't get satisfaction from your dealer then you should go above them. Start at the dealer they know who to contact at the companies to resolve issues. This is with any product.

[macinckirk]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Doug Vahrenberg &raquo;</TD></TR><TR><TD CLASS="quote">First step is talking to your dealer - have them contact their reps and manufacturers. That is the normal chain of command. If you don't get satisfaction from your dealer then you should go above them. Start at the dealer they know who to contact at the companies to resolve issues. This is with any product.

</TD></TR></TABLE>

I have NO DEALER to Talk to, the Dealer is out of bussiness that the boat was from, and the next 1 in cal is 400 miles away or 300 plus miles to 1 in AZ

I'm going to have to deal with EZ Loader myself

[fishin couillon]

For my few issues i had, i contacted the mfgr's. without any problems. I got things done alot faster and quicker. Just contact EZ and they should help you out.

[frogfishin]

Kirk I am still in business.I can try to help but thats up to you.

Marcus

[macinckirk]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by frogfishin &raquo;</TD></TR><TR><TD CLASS="quote">Kirk I am still in business.I can try to help but thats up to you.

Marcus</TD></TR></TABLE>

I'm working with Larry on this but thanks

Also the other side is starting to come apart, NOT TO HAPPY but will see if they stand up and take care of this











On a side note here is a small fishy for you all to look at

[ZeroHour]

Been there with my other boat. If its diamond dust they color is discontinued and they screwed my replacements up multiple times.

If Ez loader wont help call Robert Young at skeeter, dont bother dealing with anyone else there. Call him a few times and they will help.

They changed the mounting set ups supposedly so this wont happen again.

[macinckirk]

Just so you all know EZ Loader did step up and is sending me 2 fenders, I'll have to eat the labor cost but thats ok

So I have a 07 20I for sell now with everything fixed or wil be when I sell it

[ZeroHour]

Mac,

I understand your frustrations here but have you really exhausted your options? I contacted you 3 times about this issue and asked of your other ones and you never responded. There are ways to get help especially in our case where the dealers are really far away. I understand you not wanting the boat anymore and I was ready to unload mine at a loss as well; but if done right I think you can rectify this situation in a better manner for yourself.

I am gonna extend to you once again the suggestion that you contact me on this; I know the channels to use to try to get the issues straightened out.




Modified by coloradoman25 at 12:01 PM 5/18/2009

[Tagg007]

I'll buy it for $25K