transom saver question

[setdahook]

I tow with a motor toter/transom saver. I see a lot of boats that do not use them, it seems my engine sticks out like a target with it. I feel like I should use one because I always have with other boats but this boat the engine seems to stick straight out. Ideas, suggestions

03 SX200
Yam 200
E_Z Load trailer

[Neilslure]

Some of the best battles ever on BBC have been in the threads regarding transom savers. In my manual Skeeter recommends the transom saver.

[setdahook]

OOPS.... Did not want to start a fight. I feel they are necessary

Thanks

[setdahook]

At least I did not ask about a jackplate on my SX.

[TonyMc]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Neilslure &raquo;</TD></TR><TR><TD CLASS="quote"> In my manual Skeeter recommends the transom saver.</TD></TR></TABLE>

+1

[CRIMSONGAMBLER]

The ones with a merc may be using a -lock & stow.

[stevieraybla]

I think you can adjust the length of your transom saver so your engine does not stick straight out. I know mine has an adjustment on the shaft, you just take the bolt out and slide it to the length you need and put the bolt back in.

[TonyMc]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stevieraybla &raquo;</TD></TR><TR><TD CLASS="quote"> I think you can adjust the length of your transom saver so your engine does not stick straight out. I know mine has an adjustment on the shaft, you just take the bolt out and slide it to the length you need and put the bolt back in. </TD></TR></TABLE>

The one I have is adjustable also.

[bigskeeter20i]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by setdahook &raquo;</TD></TR><TR><TD CLASS="quote">At least I did not ask about a jackplate on my SX. </TD></TR></TABLE>