Thread: Best prop

Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Aug 2006
    Location
    ISLAND LAKE
    Posts
    168

    Best prop

    Looking to send in my Yamaha pro 23m for a little work and wanted to look around for a different prop this is my first bass boat and don't know how others will work and what they will do. i have a 2007 zx190 150 carb 6 in jack plate mounted 3 1/2 below full load two people 5900 rpm 58-59 mph gps 61-62 just me, but have to trim pretty high to get that speed and rpm but rooster tail is it about motor height so that seems ok it has good hole shot and seems to have good bow lift but i do not have much to compare it to. no chine walk any suggestions. also looking to ad a hydro tec phase kit when my warranty is up

  2. Member
    Join Date
    Jun 2004
    Location
    Lebanon, Missouri
    Posts
    3,106
    #2

    Re: Best prop (MUSKIE08)

    I recently switched from a 23M to a 23T1 with good results. According to your posted data, it looks as if you've got it setup well. If you are serious about a HydroTec kit, I would recommend doing this prior to changing props. It is quite possible a 23 pitch wouldn't be enough prop after a HT mod.
    Allison XB-21 ProSport
    Yamaha 250 SHO
    Croxton Razor 4XL

  3. Member Neilslure's Avatar
    Join Date
    Dec 2005
    Location
    Cary, NC
    Posts
    23,333
    #3

    Re: Best prop (PSM207)

    I had an 18 ft Stratos with that same motor. I was running a 25M.
    .
    Neil Eckberg- Cary, NC - 2008 Skeeter ZX250- 250 Yamaha SHO

    Kerr Lake Ba$$hole

  4. Member
    Join Date
    Aug 2006
    Location
    ISLAND LAKE
    Posts
    168
    #4

    Re: Best prop (Neilslure)

    Thnaks guys i may wait till i do put a ht kit on i have a backup it will work but not really best for my boat. Unless i find a deal on ebay.

Similar Threads

  1. Propco prop for eninrude for sale on prop forum
    By JegsCat in forum Evinrude/Johnson Motors
    Replies: 0
    Last Post: 05-13-2011, 10:49 AM
  2. Replies: 3
    Last Post: 09-25-2010, 04:58 AM
  3. Shooter prop vs Renegade prop
    By champ186dc in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 05-13-2010, 06:18 PM
  4. 2005 Mercury 200HP Optimax , New Fury Prop what is the correct Prop Nut Torque
    By GeorgeSantaRosa in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 3
    Last Post: 06-12-2009, 04:01 PM
  5. 1999 200 HP evinrude with stainless steel prop or aluminum prop
    By pvhtc in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 09-05-2005, 11:51 AM