Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Nov 2004
    Location
    london
    Posts
    30

    Compression Test - What is your opinion

    Hi,

    I did a compression test yesterday on my 1994 175 Faststrike. The numbers were all around 110 with the lowest number around 105. I did the test after the motor had warmed up, at full trottle and 4-5 seconds per cyclinder. What should this motors compression be at. I have not had this boat on the water yet and yesterday was the first time it started and it burned up a lot of the fogging agent. Will OMC Engine Tuner improve these results.

    Thanks,
    Ken

  2. Member
    Join Date
    Jun 2004
    Location
    Crosby
    Posts
    5,823
    #2

    Re: Compression Test - What is your opinion (hydrasport94)

    It is all good. If you have not decarbed in a while do it.

  3. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,163
    #3

    Re: Compression Test - What is your opinion (Won Hunglo)

    Hi Ken,
    Welcome! Your readings are fine, different gauges read different numbers. As long as you are within 10-15% of the overall reading you are OK. The faststrike is a good motor. A good decarb with Engine tuner will help keep your motor clean and reliable after a long winters nap. Don't forget to change the LU fluid also and use the new Ultra HPF in it. Happy boating. CM

Similar Threads

  1. Compression test
    By CRIMSONGAMBLER in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 7
    Last Post: 09-05-2010, 03:29 AM
  2. Here's My Compression Test!
    By Mr205 in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 6
    Last Post: 09-24-2009, 04:09 PM
  3. Compression test
    By Nikon Man in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 8
    Last Post: 08-12-2009, 01:50 AM
  4. Compression Test
    By TNLegend in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 12-28-2005, 05:14 AM
  5. opinion on these compression numbers?
    By riplips in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 03-01-2005, 04:06 PM