Thread: 150 E-TEC HO 07

Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Jun 2007
    Location
    cambridge
    Posts
    30

    150 E-TEC HO 07

    what are your experiences with the 150 E-TEC HO engine? Is performance much better than the 150? Reliability? I am looking to get a new engine, and wonder if this is the one that i want.

    /Jim

  2. Member Fiddlefarter's Avatar
    Join Date
    Mar 2005
    Location
    Smith Creek, FL
    Posts
    8,696
    #2

    Re: 150 E-TEC HO 07 (Jimboat)

    Been thinking about different scenarios myself.


  3. Member
    Join Date
    Apr 2005
    Location
    Wales, WI
    Posts
    366
    #3

    Re: 150 E-TEC HO 07 (Fiddlefarter)

    I've had an 07 150 HO since May of last year (thought it was an 06 but the serial number says 07). It's got a ton of low end torque and I haven't had an issue with it except for EMM updates. I haven't had the chance to run a normal 150 but the salesman that sold me the boat had the same boat with a 150 opti and he said there was no comparison, the 150 HO had significantly more low end torque and top end speed.

  4. Member
    Join Date
    Jun 2007
    Location
    cambridge
    Posts
    30
    #4

    Re: 150 E-TEC HO 07 (gmchiryder)

    gmchiryder - what are the differences between the 150HO and the normal 150? Is gearing the same? HP same? is the 150HO lower unit exactly same design or does it have a different nosecone and water pickup than the normal 150?

  5. Member
    Join Date
    Apr 2005
    Location
    Wales, WI
    Posts
    366
    #5

    Re: 150 E-TEC HO 07 (Jimboat)

    150 HO should be around 165hp, same gearing, lightning gearcase which should gain a couple of mph over the magnum used on the standard 150. Not sure if the water pickups are different or not.