Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Jul 2007
    Location
    Abington
    Posts
    5

    1986 60hp evinrude water flow

    my motor was fine until yesterday when i noticed the water flow from my tell tail was low. i was told to clean the thermostats how do i do this


    model # E60TLCDs


    Modified by billyboy4422 at 12:25 PM 7/8/2007

  2. Member
    Join Date
    Jul 2004
    Location
    Iva
    Posts
    2,593
    #2

    Re: 1986 60hp evinrude water flow (billyboy4422)

    read rule ONE at the top of the forums page!



    [I]TEAM CORGI DOG[I]

    1996 javelin 400T /1996 Johnson 200 Venom

  3. Member
    Join Date
    Jul 2007
    Location
    Abington
    Posts
    5
    #3

    Re: 1986 60hp evinrude water flow (lkhartwl)

    model E60TLCDSS

  4. Member
    Join Date
    May 2004
    Location
    Nashville
    Posts
    11,165
    #4

    Re: 1986 60hp evinrude water flow (billyboy4422)

    Welcome to the BBC.

    Have you checked to see if anything is blocking the overboard discharge tube? Pesky dirt dobbers.
    How long ago was the water pump replaced?

    To clean the thermostat you will need a gasket, the thermo on that motor is under the strange shaped cover on the top of the head, there are five bolts holding it on.

Similar Threads

  1. Please Help on 1994 Evinrude 60hp
    By jamenji84 in forum Evinrude/Johnson Motors
    Replies: 0
    Last Post: 08-29-2009, 04:01 PM
  2. 1988 Evinrude 60hp??
    By 98Ranger461 in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 08-08-2008, 07:24 AM
  3. 60HP Evinrude problem
    By greasemonkey in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 11-21-2007, 09:26 PM
  4. '96 60hp Evinrude Issues!!!
    By 519DVX in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 08-01-2007, 05:46 PM
  5. 40-60hp Evinrude/Johnson
    By fire4424 in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 03-06-2006, 04:56 PM