Some a couple measurements for the 719 ProXP

[NJDevil]

Hey guys. I was hoping one of you could give me a couple pieces of info about the 719.

1. How long is the boat, on the trailer, with the swing-away tongue opened up (to shorten the length)?
(if possible I'd like a measurement w/ the motor up and down)

2. What length rods will fit in the passenger rod storage bin?

Thanks in advance for your help.

[1blubyu]

My 719, 225 Pro XS, and 8" jackplate was 22'3" with the trailer tongue open.

I never put anything more than a 6'6" spinning rod in the co angler rod box. I may very well handle longer sticks, but I never tried them. (I usually kept stuff in there that I rerely ever needed).

[SHOboat719]

My 719 w/Should measures 22'2". I have had 7' rods in the passenger rodlocker

[NJDevil]

Thanks for the answers, gentlemen.

[basspro]

8 foot rods fit just fine for me in the 719.

Russ

[NJDevil]

Da-yum.... 8-footers, eh? Nice!

[NJDevil]

Sorry I didn't think to ask this on the original post, but can someone with a 719 and a 225 SHO please measure the height of the rig with the motor on either motor sticks or a motor toter and let me know the height (from the ground to the top-most point of the motor)?

I'm wondering if I'll have to trim down a SHO to get it in the garage. Hehe.