Results 1 to 10 of 10
  1. #1
    Member
    Join Date
    Aug 2006
    Location
    jeffersonville, indiana
    Posts
    1,059

    1993 175 Fastrike tach and voltage output -

    1993 175 Fastrike - VJ175GLETR/G03160000. Got around to looking at my dead tach. Replaced with new spare, still no RPM. Checked tach at post between SIG and ground, no voltage. Checked voltage at battery, with digital meter, 13 volts before starting, slowly (2 minutes) gets to 13.6 volts after running. No charging/starting component's have ever been replaced to date. Great service !!

    Need help where to check next. I do not have a service manual, but would certainly purchase one with suggestion of best to buy, and where.

    Thanks in advance

    John N

  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,150
    #2

    Re: 1993 175 Fastrike tach and voltage output - (john n)

    I'd replace the voltage reg/rectifier, you can get a shop manual from Ken Cook for your motor. http://www.outboardbooks.com/i...=year


  3. Member
    Join Date
    Aug 2006
    Location
    jeffersonville, indiana
    Posts
    1,059
    #3

    Re: 1993 175 Fastrike tach and voltage output - (ChampioNman)

    Thanks Champman - man that reg/rectifier is pricey !!

    Thanks again

    John N

  4. Member
    Join Date
    Feb 2007
    Location
    SOUTHEAST
    Posts
    496
    #4

    Re: 1993 175 Fastrike tach and voltage output - (john n)

    At tachometer...Should have 12V DC between purple wire (switched 12V+from key) and black wire (ground) with key on.
    Should have 10+/- AC volts (I think) between gray(signal) and black (running).


    Verify 12V on purple where reg/rect is plugged into engine harness with key on.

    You can perform AC test on same wires @ reg/rect on engine while running.

    ChampionMan has given you "the" correct place to purchase a genuine OEM service manual that will provide details.

    Good advice CMan.

  5. Member
    Join Date
    Aug 2004
    Location
    Collierville
    Posts
    252
    #5
    I have the same motor and changing out the regulator/rectifier got the tach working again. The new one had an extra wire that you don't have a place to hook it up to but you just leave it loose. I don't remember the color but someone on here could probably tell you.

  6. Member
    Join Date
    May 2004
    Location
    Nashville
    Posts
    11,165
    #6

    Re: (2ndCajun)

    Purple.

  7. Member
    Join Date
    Aug 2006
    Location
    jeffersonville, indiana
    Posts
    1,059
    #7

    Re: (RUSTY63)

    Rusty - or anyone eles, please. I have priced the replacement reg/recifier at my local dealer - $299. and has to be ordered. I would like to stay with BRP, if possible. Any suggestions on where I might find one a bit less than list price?

    Thanks

    John N

  8. Member
    Join Date
    May 2004
    Location
    Nashville
    Posts
    11,165
    #8

    Re: (john n)

    Part number 439561 @$272.00 can be ordered from us and shipped to your door, give the Parts Chick or Parts Chicklet a call and they will get it on its way, number is below in my siggy.

  9. Sprint Boats Moderator Bassmeister's Avatar
    Join Date
    May 2004
    Location
    Calhoun, Ga.
    Posts
    47,078
    #9

    Re: (RUSTY63)

    Parts Chicklet!!!!!! I gotta make a run to nashville!!!!

  10. Member
    Join Date
    May 2007
    Location
    LIVINGSTON, Louisiana
    Posts
    22,636
    #10

    Re: 1993 175 Fastrike tach and voltage output - (john n)

    I too had the same troubles with a faststrike like this and it was the rectifier.

Similar Threads

  1. Voltage output
    By foxman623 in forum Evinrude/Johnson Motors
    Replies: 8
    Last Post: 09-30-2011, 02:03 PM
  2. 1993 Fastrike Problems
    By bkfish in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 07-04-2011, 10:09 AM
  3. Voltage reg replacement - 175 Fastrike
    By john n in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 06-12-2009, 11:49 AM
  4. VMAX 200HP EFI Voltage Output
    By VTSkeeter in forum Yamaha Motors
    Replies: 3
    Last Post: 07-25-2008, 07:11 PM
  5. 02 225ho Ficht Output Voltage.
    By JR250SHO in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 08-18-2006, 10:00 AM