Results 1 to 9 of 9
  1. #1
    Banned
    Join Date
    Feb 2006
    Location
    nocona
    Posts
    1,717

    96 javelin tilt and trim question

    my tilt is getting real slow and jerky going down and also slow coming up. fluid is full battery is fully charged. any thoughts. thanks

  2. Banned
    Join Date
    Feb 2006
    Location
    nocona
    Posts
    1,717
    #2

    Re: 96 javelin tilt and trim question (black dallas)

    TTT

  3. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,206
    #3

    Re: 96 javelin tilt and trim question (black dallas)


  4. Banned
    Join Date
    Feb 2006
    Location
    nocona
    Posts
    1,717
    #4

    Re: 96 javelin tilt and trim question (ChampioNman)

    pardon me.
    mod. E115GLEDR
    ser. G03971368

  5. Banned
    Join Date
    Feb 2006
    Location
    nocona
    Posts
    1,717
    #5

    Re: 96 javelin tilt and trim question (black dallas)

    also there has been no work to the tilt and trim ever on this boat. this just started about a month or so ago. any responses?

  6. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,206
    #6

    Re: 96 javelin tilt and trim question (black dallas)

    Reservoir is full?? Try and bleed the system. Trim motor all the way down onto a block of wood under the skeg. Loosen the manual release valve and cycle the trim up for a 15 second count and then down for the same count. Do it 5 times both directions. Tighten the screw and see if that works.

  7. Banned
    Join Date
    Feb 2006
    Location
    nocona
    Posts
    1,717
    #7

    Re: 96 javelin tilt and trim question (ChampioNman)

    well no luck with that. didnt change a thing

  8. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,206
    #8

    Re: 96 javelin tilt and trim question (black dallas)

    Time for the shop.

  9. Banned
    Join Date
    Feb 2006
    Location
    nocona
    Posts
    1,717
    #9

    Re: 96 javelin tilt and trim question (ChampioNman)

    just put my new trim motor on and it works great. got it from leaders marine on ebay. genuine OMC part. the plug on my trim was different than the one in the rude tips and techniques. that probably took me the longest to figure out. other than that it was fairly easy, so anyone need a boat machanic??? lol later

Similar Threads

  1. Tilt and Trim Question
    By Rayburn Rat in forum Yamaha Motors
    Replies: 3
    Last Post: 03-05-2012, 06:16 PM
  2. Evinrude Power Tilt Question - '80 140hp Trim/Tilt Fit '89 40hp ???
    By hsdtech in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 02-26-2012, 04:10 AM
  3. Tilt/Trim question
    By IronDioPriest in forum Yamaha Motors
    Replies: 5
    Last Post: 07-10-2011, 03:39 AM
  4. Trim/Tilt Question
    By SANTEE in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 06-11-2009, 10:44 AM
  5. Another tilt/trim question
    By CULLN in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 03-06-2008, 07:51 AM