Results 1 to 5 of 5
  1. #1
    Member Navin-R-Johnson's Avatar
    Join Date
    Nov 2010
    Location
    Rockfield
    Posts
    178

    Minn Kota US2 and HDS7

    I've ordered my boat with the 101 lb Fortrex with the US2 and Lowrance electronics with the HDS8 in the dash and the HDS7 up front. I know the US2 will feed into the bow unit - is it possible to switch (easily) between the US2 input and the LSS-1 input on the front HDS7 unit?

    The LSS-1 unit can feed the network and therefore be available to either unit, but if the US2 is feeding the HDS7, how could I switch the input? I could imagine doing this for more detail, or if the US2 craps out and I still want the sonar up front until I can get it repaired.

  2. Member Phnx#22's Avatar
    Join Date
    Jul 2009
    Location
    Montgomery
    Posts
    1,267
    #2

    Re: Minn Kota US2 and HDS7 (Navin-R-Johnson)

    Does Lowrance offer a a/b switch??

    On my HB I have the SI and bilge transducers coming into a switch so i can cycle between the two.

  3. Member SHOboat719's Avatar
    Join Date
    Mar 2006
    Location
    Suwanee
    Posts
    985
    #3

    Re: Minn Kota US2 and HDS7 (Navin-R-Johnson)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Navin-R-Johnson &raquo;</td></tr><tr><td class="quote">I've ordered my boat with the 101 lb Fortrex with the US2 and Lowrance electronics with the HDS8 in the dash and the HDS7 up front. I know the US2 will feed into the bow unit - is it possible to switch (easily) between the US2 input and the LSS-1 input on the front HDS7 unit?

    The LSS-1 unit can feed the network and therefore be available to either unit, but if the US2 is feeding the HDS7, how could I switch the input? I could imagine doing this for more detail, or if the US2 craps out and I still want the sonar up front until I can get it repaired.</td></tr></table>


    If I am hearing your question right, you want to know if you can go between structure scan and tradition 2d easily. The answer is yes, they are just on different pages. Both inputs(feeds) are constantly there at the unit. You just pick one or the other or do split screen. Remember, if your LSS transducer is mounted at the transom, then what you are viewing at the bow is ~20ft behind you.

    The US2 and SS connect to two different ports on you HDS

    Tightlines,
    Eric

  4. Member Navin-R-Johnson's Avatar
    Join Date
    Nov 2010
    Location
    Rockfield
    Posts
    178
    #4

    Re: Minn Kota US2 and HDS7 (edowell)

    Eric - thanks! That was what I was hoping - if they are two separate feeds it should be a breeze. Nathan




    Modified by Navin-R-Johnson at 4:48 PM 2/6/2011


    "My biggest worry is that my wife (when I'm dead) will sell my fishing gear for what I said I paid for it." ~Koos Brandt

  5. Member SHOboat719's Avatar
    Join Date
    Mar 2006
    Location
    Suwanee
    Posts
    985
    #5

    Re: Minn Kota US2 and HDS7 (Navin-R-Johnson)

    No sweat!

    Tightlines,
    Eric

Similar Threads

  1. Minn Kota 101
    By bigbass111 in forum Florida Fishing
    Replies: 4
    Last Post: 09-24-2008, 08:20 AM