Z8 chine walking almost gone

[gunnerfish]

I raised the motor 1/2in 24lb pressure. still there but not as bad I am going up 1/4 in more and try again., Any body ran the hydrofoil or the stingray. I have one on my 21ssextreme came out of the hole good. Just a thought for the Z8 as lite as it is. And thanks guys for the help
Gunnerfish

[transamz9]

Go until you lose speed or get around 18 psi water pressure at WOT.

[dchance]

good news. I am going to start raising my motor on my z7 to try and eliminate some chine. Its not terrible, but I cant hold it very long at WOT.

[Gambler Bob]

When you are getting the most out of alot of boats, they chine some. Either try to raise it a little more and see what happens or you are going to have to learn how to drive thru the chine. Some times if you turn the wheel slightly to the left, quickly it can correct the chine walk.