Echo 93sv need parts help

[JohnnyO]

Bought 2 echo 93 sv. Can some one help with the following parts

1- Shoot thru hull transducer
2- "Y" cable for the shoot thru
3- Cable to connect the two units.

Any board suppliers or help with model/parts numbers.

[Todd Driscoll]

Are these units the CHIRP or nonCHIRP version?

[Todd Driscoll]

I just saw your PM indicating you have nonCHIRP units. Here is what you need:

X cable: 010-12234-07
P72 inhull: 010-10200-20
GT30: 010-01961-00
Data sharing cable: 010-12234-06

Once installed go to Settings->My Vessel-> select "Garmin GT30 + P72"

[JohnnyO]

Thank you, any thoughts, this is what comes in the box,

• echoMAP 93sv with U.S. LakeVü™ HD
• Power/data cable
• Quick-release mount
• Flush mount
• Protective cover
• GT40-TM transducer (12-pin)
• Transom mount
• 12-pin transducer to dual 4-pin sounder adapter y-cable
• Hardware
• Documentation

[Todd Driscoll]

If you want to run an inhull transducer, you need the x-cable, P72, and GT 30 I specified above.

[JohnnyO]

So what can I do with the GT-40

[Todd Driscoll]

The GT40 is an all-in-one transducer (2D sonar, Side and DownVu). You can mount it on the transom. But, if you are wanting to run an inhull 2D sonar transducer, the GT40 is not compatible with the x-cable, only the GT30 (Side and DownVu only) is.