Well, I was experimenting with some various ideas for installing my bluewater LEDs and also removing my now inop Lowrance x75 from the front deck...anyways to make a long story short, I removed one of the tie cletes from the front and now the screws are stripped out and the clete is loose...anyone else have this happen to them? Thoughts or ideas?
_______________________________________
1997 Gambler Outlaw
Powered by Mercury
Ultrex 80
Elite FS 9 & 12 with ActiveTarget
Glowin' Thanks to Bluewater LEDs
the best way to fix stripped out holes is to epoxy tooth picks into the holes, then drill a small pilot hole and reinstall the screws. Hint, the toothpicks can be cut on a band saw to what ever size hole you are trying to plug. Store bought ones may be to small...........mark
Reply With Quote