Is any one running 12" hyd. plate on a 2100. any difference than a 10" plate? the boat has an xb on it. I will get some pictures up soon.
Is any one running 12" hyd. plate on a 2100. any difference than a 10" plate? the boat has an xb on it. I will get some pictures up soon.
i had 2 inch spacers on my 10 inch bobs...ran really good for me.. i am thinking about another set for this rig...![]()
![]()
LD
For me,
I had the 12 inch set back on my last 2100 with a 300XS. On this new boat I took out the 2 inch spacers and went back to a 10 inch set back. Didn't really notice any difference on my end so it wasn't worth the extra length. Some of the guys here it is working for. I think WD is running 12 inch with a Yammie 300 and some were even going to try 14.
I am putting the plate on this weekned. Basically i am trying to skip the trial and error. Thank you guys for the input.
I couldn't tell any difference in the 12" and the 10" so I went back to the 10"...
any rough water experience with the 12" plate?
Seems that extra setback is working on the 2200's but anything more than 12in on a 2100 is a waste. I am running 15 1/2 on my 2200. I have tried 14, 10, and 12.
21 ft Stroker / 300 Yamaha with Hydrotech sportsmaster