prop for 2100/250xs

[redgambler]

this is for ldbass, i talked to Mark Croxton, he said you have played with the trophy 26 with the 2100/250xs set up. Mine is broke in now, ready to play with props any help would be great.

md

[horseshoer]

sorry i know you asked for ld but i am still gonna throw somethin at ya! infact i just made a post about the same thing in another thread. HYDROMOTIVE QUAD IV X i got to run several of those last week and i am tellin ya that they have one heck of a holeshot and pull hard through midrange and have great topend numbers not to mention they handle as good as anything i have run on my gambler. i know what my next prop will be!!!

[redgambler]

thanks horseshoer, that post is intended for any of you guys, Mark had just menitioned LD's worked with him with my set up. i may try a quad IV, i,m a prop whore so who know , all you guy's info is great stuff

md

[WDBrand]

I'd just go ahead and get one from Mark and have him blueprint it. You already know the right pitch. Get the large barrel with at least 7/8 inch vent holes. I have 1 inch in mine and I can't make it blow out.

[ldbass55]

mark... it really depends on what you want out of your set up....the hydro is really an awesome all around prop...the 26 trophy that mark has been working with me on is a little faster than the hydro...but i have a 26 tempest that mark has worked that is my fastest prop... i am also working on a 3 blade txp, that i feel will outrun all of them....the only down side of the hydro, is there will always be a prop that will outrun it on the top end..but if you decide on the hydro, go with the vent holes willie mentioned...it wont be a bad choice...also remember the hydro will need to be a larger pitch, 27 or 28.. they turn higher than most props...
LD

[redgambler]

thanks for all the input, mark has my 26" trophy right know , i'll keep ya posted md