Does anyone know where I can find parts for the quick release motor mount on a coral? I cant find anything that looks like mine .
Does anyone know where I can find parts for the quick release motor mount on a coral? I cant find anything that looks like mine .
Brian...This is the person to contact about trolling motors and parts. He's also a BBC sponsor!
http://www.jonestrollingmotor.com
I thought I would be on Easy Street by now but somehow I missed the off ramp!
Thanks Larry I will call and see if they have anything. I would like to stay the same so I dont have to drill a bunch more holes in my boat.
Well Mr. Jones doesnt know the manufacturer of this bracket, is it possible that viper used a local machine shop to build it ?
If you have the two squares mounted on the front of your boat-that mount is made by Swivl-Eze. It wasn't as popular as their mount that uses the 2 round pieces on the bow.
You must be talking about the square ones in this pic...
Yes thats it the square mounts , are they still available?
I tried pulling it up on their website but neither would pull up..I'd try contacting them..
The square mounts are no longer made, so I will have to change to something else. Does anyone have the round puck style on their boat , and if so do you like it ?
I had the round pieces on my old fish & ski-I think they fit the same base because they are swivl-eze also. You should be able to get by just buying the round pieces. Look at the picture Bryan posted above.
The round pieces might have actually held the TM a little tighter with less movement & banging around than the square pucks. Neither system holds the TM as tightly as a standard screw-down like on bass boats.
The round pieces use to have plastic covers to put on them when the TM was off to make them a little more attractive.
The round pieces should be big enough to cover up the screw holes from the square mounts.
I found that same pic on a site called shootnhunt.com but it shows two different types of mounts , mine has no base plate just the square pieces and pins. Attwood only shows the round style now, but is available in aluminum or reinforced plastic bases. I think I will order the aluminum base style and hope it covers the old holes. Thanks for the info guys .
I had the similar mount made by motor guide on my Bullet..It a great mount but you have to drill six holes in yoru boat where the round pucks fit.The long plate stays on your TM bracket..Mines was all aluminum..This is a close look at the one above....
This is what it looks like when the TM isn't on the boat..This was mines mounted down the center.Thats the two aluminum pucks..
Reply With Quote
