Looking for the best way to fill screw holes and be able to re-drill and secure with screw....what's the best product to use not really possible...
Looking for the best way to fill screw holes and be able to re-drill and secure with screw....what's the best product to use not really possible...
Marine-Tex...SB...
2006 Ranger 188 VX with 150 E TEC and I EAT BASS!!!
+1
Well now, thanks SB
No problem Carlos...SB...
2006 Ranger 188 VX with 150 E TEC and I EAT BASS!!!
You can also get matching Gel Coat from Ranger. Mix hardner with it and fill holes................will match perfectly. Also, a couple of tricks if you are going to use the same holes; One is to use a toothpick in hole and put in new screw..................toothpick will fill up some of wallowed hole when new screw is installed. Also, a small wire tie in old hole will work same as toothpick....................trim off excess when new screw(s) are installed....................RROriginally Posted by Firemedicoh
"Never argue with an idiot; He will beat you to death with stupidity"
Reply With Quote