Thread: help me out

Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Jun 2006
    Location
    talbott,Tennessee
    Posts
    672

    help me out

    i went yesterday and looked at a 99 201s w-200 merc efi,i took it down the lake and at 1/4 trim i was turning 5900 rpms @ 60mph.i never got it above 1/4 trim!it had a 23p temest 3 blade prop.sounds like it needs a 25p?any suggestions?one more think i saw bout the boat was it had cracklines in the jel coat rite behind the passenger seat any suggestions on what that would cost to fix? he was asking 14,500 for the boat and i got him down to 11,000 think its worth it?

    thanks, jeff (TN)
    JEFF
    TALBOTT,TN
    VIPER COBRA 201
    Mercury pro xs

  2. Cobra Boats Moderator Backlash Ar's Avatar
    Join Date
    Jun 2004
    Location
    Mountain Home, AR
    Posts
    16,951
    #2

    Re: help me out (moose288)

    Moose, first things first.....Welcome to the Cobra Forum, glad to have you stop by. I just sent you an Instant Message. Did you get it? If not, you need to turn your pop-up blocker off. The BBC has its own pop-up blocker so no need to worry. IM's are actually pop-ups, so if you don't turn your blocker off you won't get any IM's from the BBC.


    I thought I would be on Easy Street by now but somehow I missed the off ramp!

  3. Member Cleveland's Avatar
    Join Date
    Jun 2004
    Location
    Summerfield, FL
    Posts
    2,224
    #3

    Re: help me out (moose288)

    Hi Jeff

    Where exactly are the fractures behind the passenger seat located ?? somewhere on the cap ?? Are they in the gel only or do they run thru the metal flake ? Kinda hard to give you a price on what it would cost to have them fixed. Do they look real bad ?

  4. Member Tx 201's Avatar
    Join Date
    Aug 2004
    Location
    Abilene, Texas
    Posts
    3,037
    #4

    Re: help me out (moose288)

    Probably the prop needs to be re-cupped. Sounds like it has lost it's bite and you are getting a lot of slip. I have a '00 201 with a 23 Trophy Plus and a 200 EFI. Boat runs great, but I think a 25 would be a little much, depends on your altitude and how you are going to run your boat.

    One other thing to think about is at this time of the year, (summer) you are not going to see good numbers like you would in the fall/winter/early spring. Two strokes like to run in cooler air. By the way, my boat runs best at 3/8 trim and I am 3.5 or 3.25 below the pad on a 8" jackplate. I don't want to spend the money on a 15" JP to gain a few MPHs. Lightly loaded I could hit 69 BEFORE I put a skeg guard on it, lost about 4 mph dragging that thing behind the boat. Oh well, I am sure it has saved me money in repairs.

  5. Member
    Join Date
    Jun 2006
    Location
    talbott,Tennessee
    Posts
    672
    #5

    Re: help me out (Tx 201)

    hey, thanks alot guys.im glad to have a site like this

    jeff
    JEFF
    TALBOTT,TN
    VIPER COBRA 201
    Mercury pro xs

  6. Cobra Boats Moderator Backlash Ar's Avatar
    Join Date
    Jun 2004
    Location
    Mountain Home, AR
    Posts
    16,951
    #6

    Re: help me out (moose288)

    moose288...Instant Messgae sent in answer to your question. Hope it helps!


    I thought I would be on Easy Street by now but somehow I missed the off ramp!