door and carpet next week. here are a couple of plcs!
door and carpet next week. here are a couple of plcs!
saw that on the resto page as well. I would like to do something similar - mine has a flippin deck insert but it covers up my step compartment. keep us posted --
ted
--------------
07 basscat p2, 07 etec 200 h.o.
Nice job. It's really refreshing to see a Charger owner that cares about his rig. I have this friend, Ted, that doesn't seem to give a damn about the condition of this boat. Sure would be nice if he did some maintenance every once in a while. Maybe I should pass this thread along to him. Ooops! Looks like he beat me to it.
Nice job on the insert.Looks a little high for him anyways (he's kind of short).
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ted Martin »</TD></TR><TR><TD CLASS="quote">saw that on the resto page as well. I would like to do something similar - mine has a flippin deck insert but it covers up my step compartment. keep us posted --
ted</TD></TR></TABLE>
Mine also has an insert. I would like to add a compartment so I can store my tackle in the middle rather than in the starboard compartment. I have a lot of weight on that side of the boat.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WishICouldFishMore »</TD></TR><TR><TD CLASS="quote">doesn't seem to give a damn about the condition of this boat. Sure would be nice if he did some maintenance every once in a while</TD></TR></TABLE>
Hey, I do lots of maintenance. No cleaning, but lots of maintenance!
Shouldn't you be staying on the Triton board rather than trolling on these good Charger folks board?
And the 'short' comment - c'mon now, that's not right!!
--------------
07 basscat p2, 07 etec 200 h.o.
i hear ya - the biggest challenge on mine is the sub compartment (setp) that's already there. I would like to eliminate that sucker completely and make the whole area under the insert accessible. via latch or other means.
I'm sure if i had some time and a friend with some skills we could probably knock that out in an evening. it would just involve some cutting to eliminate the step compartment and install a hinge on the insert. And a front plate with carpet for stability between the consoles. In my boat this owuld add a serious amout of center storage and wouldn't impact the overall weight or stability of the boat at all.
--------------
07 basscat p2, 07 etec 200 h.o.
Ted,
Keep us informed we anciously waiting to see the finish product.Looken good so far!
Megabassman
it's actually metalman who posted the pics above. the rest of us are drooling over ideas for our own!
--------------
07 basscat p2, 07 etec 200 h.o.
Reply With Quote