Thread: Need Help

Results 1 to 7 of 7
  1. #1
    Member jp71291's Avatar
    Join Date
    Apr 2011
    Location
    West Monroe, LA
    Posts
    5,712

    Need Help

    I went night fishing tonight and bumped the side of the boat on a stump while idoling. It hit right on my raised ChampioN lettering and now there is a huge scuff on it. Is there anywhere I can get the replacement lettering. I want to replace it and get the same raised lettering as on the other side. The colors are black, chrome, then white. Any help would greatly appreciated. Thanks ya'll. This is my baby and I work so hard to keep it from getting scratches. This has me fired up.


  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,198
    #2

    Re: Need Help (jp71291)

    C&O Marine parts should have them. Look at the sponsor for their link or call Carol Tuesday.

  3. Member bassin butch's Avatar
    Join Date
    Sep 2007
    Location
    Mount Juliet tn
    Posts
    10,411
    #3

    Re: Need Help (ChampioNman)

    C&O is the place! Count your blessings it was the graphic and not the gel coat.
    See ignorance daily

  4. Member jp71291's Avatar
    Join Date
    Apr 2011
    Location
    West Monroe, LA
    Posts
    5,712
    #4

    Re: Need Help (bassin butch)

    thanks guys. I will call them tomorrow. How difficult is it to remove the old lettering and put the new on?

  5. Member bassin butch's Avatar
    Join Date
    Sep 2007
    Location
    Mount Juliet tn
    Posts
    10,411
    #5

    Re: Need Help (jp71291)

    Not hard @ all: use a heat gun (low Setting) also if you spray goo gone on the sticker it will come off easy. Just be sure to clean the area well! Apply the decal then a coat of wax.

    The hard part is getting a decal squared!

    And dont get crazy with the heat gun!
    See ignorance daily

  6. Member
    Join Date
    Aug 2004
    Location
    Kerrville
    Posts
    960
    #6

    Re: Need Help (bassin butch)

    If you don't have a heat gun a hair dryer will get it done too


    Pop

  7. Member jp71291's Avatar
    Join Date
    Apr 2011
    Location
    West Monroe, LA
    Posts
    5,712
    #7

    Re: Need Help (mha)

    Well I called Carol and it's on the way. Now I just hope I'm smart enough to get the old off and the new on.