shoot thru hull HELP

[kensnider]

I need to install a shoot thru hull transducer in my 93' 184 dcr. After removing all the stuff I am thinking that I have to remove the gas tank. Right/Wrong. If so how is the tank bolted down. Is this the only way that I can mount the transducer so I have depth when on plane. Any help
Didn't have to remove the tank. I was able to get the T shaped floorboard out. I have removed the 2 old transducers. All the pumps look like new so I think that they have been changed. Just waiting on my exchange transducer from Humminbird. Thanks to all for the help


Modified by kensnider at 6:01 PM 2/18/2011

[siskiyoucrash]

Holy cow another siskiyou guy!! When I had my 184 I had to take the tank out to do it right. The livewell pumps were out anyhow and they were down there also, so did that while I was at it. If yours have any age on them I would do that also. If I remember right the tank just sits in there,but it was a bitch to get it out as you have to turn it up on the front and angle it out. If the boat was originally rigged with them you can usually see the cable in the tunnel under the gunnel where the steering and wiring run. My 191 that I have now has two rigged and one was never used. Let me know how it goes,,I'm in the phone book if you need or IM me.

[SCOTT196]

If yours is the same as my 91 184, you can mount it under the door that the oil tank sits on.