Diamond Plate glue

[Lpolk]

Anyone know what glue they use to attach the diamond plate to our finders and steps ? Mine is beginning to come loose.

[ChampioNman]

Not sure Larry, thought it was some kind of double sided backing. Maybe try Gorilla glue?

[BILLY]

All mine had rivet's on them.


Modified by BILLY at 5:22 PM 9/29/2010

[champion_206]

some are riveted, some have 2 sided taped

[BILLY]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by champion_206 &raquo;</td></tr><tr><td class="quote">some are riveted, some have 2 sided taped</td></tr></table>

Good to know.

[H2O_Fowl]

I would rivet them on.

[Blue203]

Mine are riveted on. However they are starting to rust. If you rivet them just make sure you treat where you drill the holes.

[Jasonrs]

+1

[champ203rude]

rust forms quickly under these things and the holes.... i suggest that you mark with a sharpy the area of the plate, take the plate off... tape up the bumper area .. and spray line-x ( truck bed rubber ) across the entire area that you are going to place the diamond plate... then rivet it down on top of that surface.

doing so u won't get any rust form from water the seeps under the plate

good luck

[Lpolk]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by champ203rude &raquo;</td></tr><tr><td class="quote">rust forms quickly under these things and the holes.... i suggest that you mark with a sharpy the area of the plate, take the plate off... tape up the bumper area .. and spray line-x ( truck bed rubber ) across the entire area that you are going to place the diamond plate... then rivet it down on top of that surface.

doing so u won't get any rust form from water the seeps under the plate

good luck</td></tr></table> Good Idea

[pmgoffjr]

Couple of beads of 3M 5200 and it won't go anywhere...