91 Champion 200XRI

[Mocatt]

I have an ignition switch issue on this boat. The tumbler has broken out of the housing. Is this a Mercury part or will I have to adapt some newer style ignition switch. With this being a pre genmar boat I wasn't sure what direction to go. I used a little JB weld on it and it is working good right now but I want it repaired correctly. Thanks in advance!!!!! I forgot to mention the switch is in the dash.

Glenn

[Tx Champ]

It's a Mercury part, but should be available through several means. You need to see if you can pull a part number off of it. I'm seeing aftermarket switches on the web for around $22

[Mocatt]

Will do thanks! I wasn't sure if it was a motor part or a boat part.