Results 1 to 8 of 8
  1. #1
    BBC SPONSOR
    Join Date
    Mar 2005
    Location
    Independence, Kansas
    Posts
    15,455

    pumpout question

    my pumpout is not working on my boat. the motor makes noise and seems to have suction but it wont pump the water out. i wonder if the lines are clogged up or something. also, where do you get a new livewell open/close valve at?
    FTO Marine Supplies
    BBC Sponsor

  2. Moderator Luke's Avatar
    Join Date
    Oct 2004
    Location
    Sullivan,MO
    Posts
    29,400
    #2

    Re: pumpout question (Bassman25)

    didnt we go through this last year
    check the lines to see if they are clogged....check the pump to see if its cloged or broke.....Valves you can get at any dealer

  3. BBC SPONSOR
    Join Date
    Mar 2005
    Location
    Independence, Kansas
    Posts
    15,455
    #3

    Re: pumpout question (Luke)

    just now getting time to work on it
    FTO Marine Supplies
    BBC Sponsor

  4. Member
    Join Date
    Jul 2004
    Location
    Owensboro KY
    Posts
    18,919
    #4

    Re: pumpout question (Bassman25)

    When mine did that it ended up being the vanes were actually not spinning on the motor shaft. I could hear the motor running, it would just push water to the pump out hole but no further. I had flushed out the system so I knew it wasn't clogged.

    The fix was pull the tank (off to C&O for that one since I am an hour away), the pump on my 187 sat under the tank near the back of the livewell. New pump and it was back to wetting the dude that had the heavy bag at weigh in next to me.

  5. Member
    Join Date
    Jun 2005
    Location
    Scammon
    Posts
    505
    #5

    Re: pumpout question (JohnM)

    Don't forget, that the pump out will NOT work if the drain valve is open.

  6. BBC SPONSOR
    Join Date
    Mar 2005
    Location
    Independence, Kansas
    Posts
    15,455
    #6

    Re: pumpout question (200 Elite)

    i actually never knew that...that could be part of the problem
    FTO Marine Supplies
    BBC Sponsor

  7. Moderator Luke's Avatar
    Join Date
    Oct 2004
    Location
    Sullivan,MO
    Posts
    29,400
    #7

    Re: pumpout question (Bassman25)

    mine will work if the pump is on but it dont get no where near the pump out with the valve open

  8. Kansas Bass Club Moderator
    Join Date
    Jun 2004
    Location
    Topeka KS
    Posts
    15,797
    #8

    Re: pumpout question (Luke)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Luke &raquo;</TD></TR><TR><TD CLASS="quote">mine will work if the pump is on but it dont get no where near the pump out with the valve open </TD></TR></TABLE>

    Same here.

Similar Threads

  1. Adding Pumpout???
    By grassycreek in forum Skeeter Boats
    Replies: 2
    Last Post: 01-13-2012, 05:40 PM
  2. PUMPOUT IN A 361
    By FSHN4DLRS in forum Bassboat Restoration
    Replies: 17
    Last Post: 11-05-2009, 06:45 AM
  3. Live well pumpout?
    By mrxpress8567 in forum Skeeter Boats
    Replies: 2
    Last Post: 06-12-2008, 06:42 AM