Was flushing motor (E50DPLSDA) 11/2005, with the ear muffs and thought I would gve it a little gas. It would not go over 1300rpms give or take a little. It would just stay at that rpm like it was on some limiter. Is this normal ? Water pressure? Could this be related to a little miss while running boat just under plane (2900rpms)
Welcome to the BBC.
DO NOT increase the RPM's above idle on any twin cylinder John/Rude on a Flushing devise.
When the in line E-TEC is in neutral it will not go above a predetermined RPM.
I don't know if you are old enough to have even heard of or remember Chubby Checker.
At any rate, he put out a song call limbo rock.
-------------------------
Don't move that limbo bar
You'll be a limbo star
How low can you go
-------------------------
Well keep them R's low while on the muff.
If you can't run with the big dogs, just stay on the porch.
Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011
SST... 14 1/2" x 19" 45.0 mph.@4950
Rebel 15 1/2" x 17" 45.1 mph.@5250
Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
Rebel 15 3/4" x 15" 44.2 mph.@5700-5750
Reply With Quote
