Where could i find the mod # and Ser # on my motor? It is supposed to be a 1991 Evinrude 200 XP. Looked everywhere on the motor and could not find any #'s whatsoever. Thanks Eric
Where could i find the mod # and Ser # on my motor? It is supposed to be a 1991 Evinrude 200 XP. Looked everywhere on the motor and could not find any #'s whatsoever. Thanks Eric
Looking from the rear of the motor toward the bow of the boat the left side of the engine, on the tilt unit should be small plates with the info..
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bassmeister »</TD></TR><TR><TD CLASS="quote">Looking from the rear of the motor toward the bow of the boat the left side of the engine, on the tilt unit should be small plates with the info..</TD></TR></TABLE>
Sorta like in dis here place rat cher.
http://i46.photobucket.com/alb...1.jpg
If you can't run with the big dogs, just stay on the porch.
Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011
SST... 14 1/2" x 19" 45.0 mph.@4950
Rebel 15 1/2" x 17" 45.1 mph.@5250
Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
Rebel 15 3/4" x 15" 44.2 mph.@5700-5750
DoferGofer --you're too squared away..... photos and all
If you can't run with the big dogs, just stay on the porch.
Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011
SST... 14 1/2" x 19" 45.0 mph.@4950
Rebel 15 1/2" x 17" 45.1 mph.@5250
Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
Rebel 15 3/4" x 15" 44.2 mph.@5700-5750
Thanks Guys for the info guys, but looked all those places and nothing. must have fallen off or taken off by someone. We are going to rebuild it and need the numbers. I will figure somthing out. One more question. Does anyone offer a long block complete with crank pistons: (the whole nine yards) well everything but the electronics etc. ?
Reply With Quote
