Results 1 to 4 of 4
  1. #1
    Member back_lash's Avatar
    Join Date
    Sep 2008
    Location
    Louisville, KY
    Posts
    1,348

    Does anyone know which flush cleat to use for replacements

    Looking at replacing the front two cleats with a flush type or pull up cleat. I've got a 2000 with the standard cleat that came with the boat but want to replace them but not sure which ones would work / cover the current holes.

    Thanks for any help.

  2. Member
    Join Date
    Oct 2007
    Location
    sudbury
    Posts
    2,062
    #2

    Re: Does anyone know which flush cleat to use for replacements (back_lash)

    I use the Scotty flush mount rod holder cleats made of black plastic that have the little rubber caps attached to keep water out. They feature optional , removeable rodholders or cleat rings that can be installed in seconds and serve double duty very well. The only drawback to them is a 1 1/4 hole is required to be drilled in order to flushmount them with a holesaw and they require four screwholes . They look very good installed and weigh next to nothing.

  3. Member
    Join Date
    Dec 2004
    Location
    West Des Moines
    Posts
    292
    #3

    Re: Does anyone know which flush cleat to use for replacements (back_lash)

    Backlash, I'm thinking of doing the same. Most sites dont give measurement of new cleat. Let me know if ya find something.

    Dex \"Slingblade\" Bryant------------ West Des Moines, Iowa
    Team Blazer

  4. Member back_lash's Avatar
    Join Date
    Sep 2008
    Location
    Louisville, KY
    Posts
    1,348
    #4

    Re: Does anyone know which flush cleat to use for replacements (Dex202)

    I'm looking at Attwood. They have the measurements on there website. Looks like the 4 1/2" would work fine...

Similar Threads

  1. flush cleat ?
    By tmcustoms in forum Skeeter Boats
    Replies: 1
    Last Post: 02-14-2012, 08:54 AM
  2. Boat Cleat nut
    By keysd13 in forum Blazer Boats
    Replies: 4
    Last Post: 02-03-2012, 04:21 PM
  3. Adding a cleat
    By richard stone in forum Bassboat Restoration
    Replies: 3
    Last Post: 08-12-2010, 06:24 PM
  4. Cleat
    By Bullet3119 in forum Bullet Boats
    Replies: 18
    Last Post: 07-19-2010, 03:48 PM
  5. Mooring cleat help
    By buzzzzbait88 in forum Bassboat Restoration
    Replies: 2
    Last Post: 02-26-2009, 08:04 AM