Results 1 to 5 of 5
  1. #1

    new to the board and need some help with setup

    I have a 1999 Blazer 202 DC with a 1994 Mariner 200 2.5 efi with 33cc heads, short tuner, open exhaust, bobs low water pick up , 14" detwiler hyd jack plate. I am running a 25 pitch trophy 6600 rpms 73 mph on gps does this sound correct?




    Chuck Braud
    99 Blazer 202
    05 Mercury 250xs

  2. Member
    Join Date
    Dec 2004
    Location
    Cartersville GA
    Posts
    300
    #2

    Re: new to the board and need some help with setup (blue blazer 202)

    26 trophy will be a little faster and OK hole shot.27 Tempest will be even faster but hole shot will suck.The low water pickup is also slowing you down I had a 97 202 /200 carb merc with a Bob's and switched to a stock housing and picked up 1.5 mph.Also aan uncut 28 chopper2 works well also just a little slow on take off.

  3. #3

    Re: new to the board and need some help with setup (MIKEinGA)

    Going to get the prop turned to a 26 pitch.




    Chuck Braud
    99 Blazer 202
    05 Mercury 250xs

  4. Member
    Join Date
    Feb 2006
    Location
    Polkville
    Posts
    18
    #4

    Re: new to the board and need some help with setup (MIKEinGA)

    Mike,

    What was your motor height etc. on your 200 merc. I have a 98' 202 w/ 200 merc carb. Everything stock, but has a 4 blade prop that has the blades chopped... Not sure the manufacturer. Just looking for clues on setup.
    Brian Branch
    2008 Blazer 202 Pro V

  5. Member
    Join Date
    Jul 2006
    Location
    Hogansville
    Posts
    251
    #5

    Re: new to the board and need some help with setup (blue blazer 202)

    I've got a 202 and when i first bought it, it had a 200yammie on it with a 3blade 25m and about 73/74 was all i could get! check your h2o pressure and go up with the plate some!

Similar Threads

  1. Swimbait setup: Your rod/reel/line setup?
    By Mark Perry in forum Rods & Reels
    Replies: 88
    Last Post: 02-19-2018, 08:55 PM
  2. Measuring Board Holder (Bump Board)
    By BuzzB8 in forum Stratos/Javelin Boats
    Replies: 5
    Last Post: 05-18-2011, 09:47 AM
  3. Replies: 7
    Last Post: 04-10-2011, 01:37 PM
  4. Replies: 14
    Last Post: 03-16-2006, 05:05 PM
  5. Rusty, Your opinions on my setup board info please.
    By aquasonic in forum Evinrude/Johnson Motors
    Replies: 7
    Last Post: 07-05-2005, 05:21 PM