Results 1 to 5 of 5
  1. #1

    Need to thank Ge Blazer

    This is a stand up guy. If you are in the need for a prop or need information........this is your man . I thought I could talk just fun'n with ya. Enjoyed the information, the conversation was great.......... looking forward to the new prop

  2. Member
    Join Date
    Jun 2004
    Location
    Ninety Six
    Posts
    2,809
    #2

    Re: Need to thank Ge Blazer (rayz379)

    Anytime ray...maybe we can get that 210 going a little better.

  3. #3

    Re: Need to thank Ge Blazer (GE Blazer)

    Hey I went out today for a while. I am running about 9 lbs WP WOT. Is that OK. Motor is at 2" below and I am at 1/4 trim (thats the level spot you had me mark)5700 rpm's 71 MPH GPS. So now I have something to compare the new prop with Thanks Again for your time and information.

  4. Member
    Join Date
    Jun 2004
    Location
    Ninety Six
    Posts
    2,809
    #4

    Re: Need to thank Ge Blazer (rayz379)

    I don't like where your water pressure is. Most of the time, at least on my boat, the TXP's have better w/p than some of the other props. i think that has to do with the way it carries the boat. We'll see if it makes a difference.

  5. #5

    Re: Need to thank Ge Blazer (GE Blazer)

    I am having a new pump put in whle they have the LU off. So maybe that will cure part of it. It is coming around, just takes time........
    Or as Allan Jackson say "It'll just take money"

Similar Threads

  1. Hey GE Blazer
    By John Br. in forum Blazer Boats
    Replies: 2
    Last Post: 04-20-2008, 01:55 PM
  2. Hey GE Blazer and Blazer Guys
    By BucksnBass525 in forum Blazer Boats
    Replies: 9
    Last Post: 12-14-2007, 08:04 AM
  3. 2007 Blazer OT slowest Blazer award goes to...
    By brandall in forum Blazer Boats
    Replies: 9
    Last Post: 06-28-2007, 04:35 AM
  4. What a day in the Blazer......
    By Jason Phillips in forum Blazer Boats
    Replies: 6
    Last Post: 04-23-2006, 12:47 AM
  5. Value of my Blazer
    By dchance in forum Blazer Boats
    Replies: 1
    Last Post: 02-20-2006, 09:36 AM