Thread: trim help

Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jun 2004
    Location
    Madison Heights, Virginia
    Posts
    232

    trim help

    trim on the motor itself and the bow dont work but the trim on the throttle does any way to test the other two to find the problem . 1989 gt 150

  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,129
    #2

    Re: trim help (curiousangler)

    Trim on bow is spliced into the main harness. On the motor is bullet conectors into the box. Make sure the red lead is connected at all switches. Blue up, green down.

  3. Member
    Join Date
    Jun 2004
    Location
    Madison Heights, Virginia
    Posts
    232
    #3

    Re: trim help (ChampioNman)

    hey chapionman, what powers the switch on the motor , i can unhook the bullet connectors hook up the battery and get it moving , but when i reconnect the bullets nothing happens from the switch, tried this from the front also but got no luck from the battery there, i can follow the wires back from the bow to the dash then from there the wires run into a big wire to the back , I know this is going to sound stupid but do you think i am missing a wire connecting it to my battery or are they powered by the 2 main wires that go to the battery

Similar Threads

  1. Question about trim rods and removing trim caps.
    By kyle31 in forum Yamaha Motors
    Replies: 3
    Last Post: 03-13-2011, 09:00 PM
  2. Replies: 4
    Last Post: 01-24-2011, 11:53 AM
  3. Trim "Jerking" through Movement When I Trim Down During Idling
    By champ203rude in forum Evinrude/Johnson Motors
    Replies: 12
    Last Post: 08-11-2010, 05:19 AM
  4. Question on Teleflex Pro Trim (flasher type trim control)
    By Triton85 in forum Novice Boaters Forum
    Replies: 3
    Last Post: 02-02-2010, 04:35 PM