Who's do you prefer? I know they are all practically the same. I have one of Scott's who's a forum sponsor. It's great but I don't like the way the open end gets hung on the eyes of the rod when you remove it. Are all of them except the rod socks not sealed on the open end so they all catch in the same way?
Not trying to step on any toes on here, but I like the Rod Glove brand best. They seem to have a wider opening at the bottom, and they dont seem to hang up much.
If you are ashamed to stand by your colors, you had better seek another flag.
On the day I die I know where I'm gonna go, me and Jesus got that part worked out. I'll wait at the gate till his face I see, and stand in a long line of sinners like me.
"Only the dead have seen the end of war" Plato
seems to me they are all the same. I bought a few and not impressed. The eyelets catch and the socks always catch the lure. Glad I did not buy more
2018 Phoenix 920 Pro XP
I use the BPS ones. Solid not mesh.
They are real slick on the inside and outside. Slip in and out of the rod locker rack holes real easy and on the rods the same.
I've never had any problems with them at all.
The lack of different colors is the only down I can think of.
**
Life is kinda hard but it's
better than the other options .. er ..option !
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by keithbass2609 »</td></tr><tr><td class="quote"></td></tr></table>
i recently bought some of the bps rod sock and they are not worth much. they catch on the eyes and are too small to go over the bottom eye. sending them back besides that the junk was made in china
I have a sampling of the "Rod Glove" offerings they sent for sponsoring the "Midwest Rally" on Table Rock and they are very well made and have a little more room than the Stick Jackets I have on all my rods.
I use one from a sponsor on here and it works fine. I wouldn't mind trying out one of the angler innovations socks though. They are made from neoprene and have a built in reel cover. But at $21 each a little pricey.
I have had 2 stick jackets blow off the rods, I on the lake the other on the interstate, I like Scotts for the extra strap he puts on for the micro guide rods. Keeps the sock on while boating or trailering. JMHO
Look at upgradefishing.com.
Tried to incorporate all the lessons learned to make a product that works and is suitable to everyones needs.
Thanks
I got some of the BPS ones and I cannot get the spinning rod version over the last (and biggest) eye. You are not supposed to cut the rolled up material loose are you?
TOXIC
Board sponsor also!
http://www.bbcboards.net/zerothread?id=707130
Looking for a good one for a spinning rod that will go over the biggest guide.
HP
My fav is the Stor's-It but there are some good board sponsors as well
Edit: Both went over the guides on a spinning setup, no problem.
http://www.storsit.com/
http://www.coletackle.com/
I have some that I ordered from http://www.rodsox.com. I like those because he coats the bottom part of the rod sock with a rubber material so that your lures dont get hung up in the mesh.
Reply With Quote
