How Do I ?

[ranger1055]

I had a dealer not honor his commitment on installing my jackplate. I guess I'll do it myself. I installed the one on my last boat, but that motor had a lift ring. I now have a 2004 225 HO and there is no lift ring. Is there a special tool from BRP or how do I attach to the motor to lift it off? I really would like to get this done this weekend so I can do the setup. I start back into tournaments on the 15th.
Thanks, Greg

[Dae]

Here's what ChampioNman has posted in the past:

"I use a harmonic balancer puller that you can get at any auto parts store. Go to Lowe's/ HD and get a eye bolt, 3 5/16th 24 bolts about 3" long large washers, for the bolts and eye ring and screw the bolts into the flywheel. Lift away to your hearts content, plus you can use the puller to remove your Flywheel should you ever need to. CM "

I'm not sure if it's the same in a '04 but I would think so.

Good Luck!

- Dae

[rudetech1]

You could also see if a dealer has a tool rental.

[ChampioNman]

It is.