another question

[barchief]

how in the heck do you get the #%^% thrustwasher off? I don't want to break anything!

[Al from Canada]

Give it a sharp tap or two with a hammer (not a rubber hammer), <u>towards</u> the motor. It'll break loose.

[RoadrashPaul]

I am just going to keep my mouth shut this time

[NY Trooper]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Al from Canada &raquo;</td></tr><tr><td class="quote">Give it a sharp tap or two with a hammer (not a rubber hammer), <u>towards</u> the motor. It'll break loose. </td></tr></table>

What the boss said.....

[flipNfrog]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Al from Canada &raquo;</td></tr><tr><td class="quote">Give it a sharp tap or two with a hammer (not a rubber hammer), <u>towards</u> the motor. It'll break loose. </td></tr></table>

[barchief]

That did it!! Thanks a bunch guys!!!

[scstarr]

grease the taper on the shaft wher the washer sits , when you grease the prop shaft splines, It will be much easier to get it off next time.