I've seen lots of posts about taking away material in a mold with a Dremel or similar device. But what if I want to create a void in the mold that would require adding to the mold? For instance, making the top part of a shakey mold flat like a Spot Remover. What material/process would this involve? Thanks!
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Does it "stick" to the aluminum mold, unlike the lead?
JB weld works fine and will work for quite a while as long as you do not or the mold get too hot. I have poured close to 1000 on one of my 1/4 oz football head molds that I modified and it is still working fine.
I also use this for some applications, But not for what your talking about.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Reply With Quote
.jpg)
