With the phase 3 on a 3.3 250 can you do anything with the oil return leaking oil all over the place??? Maybe plug it or run it some where else so it don't get oil all over the motor by coming out of the bottom of the cowling??
With the phase 3 on a 3.3 250 can you do anything with the oil return leaking oil all over the place??? Maybe plug it or run it some where else so it don't get oil all over the motor by coming out of the bottom of the cowling??
The oil is from the throttle body because the air box is not used. If you want to loss some HP........you could remove the 1 inch spacer and re-install the air box.
how much HP will I lose???
Thanks for the help
Modified by fishin fever at 6:31 PM 11/29/2008
Looks like you boys could come up with some sort of catch basin for the oil so it would not drip all over every thing.
One of the sacrifices for going fast..............it is not bad if you clear the engine out before you turn it off. Mine only leaves a spot the size of a dine or nickle??
If you tilt the motor its every where... What do you mean by clearing the engine out???
I suspect that you have a long no wake area to get to the trailer?? If so...when you put it on the trailer, put it in gear and run the engine up and clear (clean it out).
Cleaning it out so to speak works really well,dont have near the mess I used to.You'll get used to it.Not worth loosing 10-12 hp over it
I can not stand to have a oil leak on anything. My custom built Harley does not leak a drop but it took some time to get it that way and I really would not want my boat motor to leak!! Not very GREEN!
If you order a Phase III kit ............we will make a coonass grease drip kit
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
I am not doing a thing until I have this motor running like it should again!!!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spider1 »</TD></TR><TR><TD CLASS="quote">I am not doing a thing until I have this motor running like it should again!!!</TD></TR></TABLE>
And when will that be????????????
Who knows I may have to go back to a black motor just to break 90 again
I hear there is a 118 mph Etec over on the other forum
Reply With Quote
.jpg)