Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Mar 2005
    Location
    Lockwood, MO
    Posts
    224

    HPDI LU lube specs?

    Guys I thought my 3.3 HPDI took a little over a quart for gearcase lube. I have changed it twice since I have owned it and I can only get a little less than a quart in it before it starting coming out the vent. I let it drain for 30-40 min both times. This time I drained it the lube was blueish color, which is what my dealer put in it last time. I don't know what brand but it wasn't Yamalube because yamalube is brown. Anyways I re-filled it with Yamalube, hope mixing doesnt hurt.
    Old Boat - 2005 520DVX 2011 Merc 225 Pro XS, HDS 8 and 9 Touch, Bobs JP, 25p Tempest

    Old Boat - 2018 Z520C Cup Package, 112 Ultrex, HDS 9 and 12 Carbon, Powerpoles, Merc 250 Pro XS, 25p Fury

    Current - 2019 Z520C Cup 112 Ultrex, 4 Stroke 250 Pro XS Merc, Slidemaster JP, Powerpoles 23p Fury

  2. Banned
    Join Date
    Jun 2004
    Location
    Apex, NC
    Posts
    4,828
    #2

    Re: HPDI LU lube specs? (HAWKHPDI)

    Tilt up a little while draining oil.

  3. Member
    Join Date
    Mar 2005
    Location
    Lockwood, MO
    Posts
    224
    #3

    Re: HPDI LU lube specs? (Rich Z)

    Well I am at the lake 100 mile from home right now, so I assume since while it was level it came out the vent hole I have enough lube in it?
    Old Boat - 2005 520DVX 2011 Merc 225 Pro XS, HDS 8 and 9 Touch, Bobs JP, 25p Tempest

    Old Boat - 2018 Z520C Cup Package, 112 Ultrex, HDS 9 and 12 Carbon, Powerpoles, Merc 250 Pro XS, 25p Fury

    Current - 2019 Z520C Cup 112 Ultrex, 4 Stroke 250 Pro XS Merc, Slidemaster JP, Powerpoles 23p Fury

  4. Banned
    Join Date
    Jun 2004
    Location
    Apex, NC
    Posts
    4,828
    #4

    Re: HPDI LU lube specs? (HAWKHPDI)

    It will be fine. You probably just had some old oil left inside when you refilled it.

  5. Member
    Join Date
    Mar 2005
    Location
    Lockwood, MO
    Posts
    224
    #5

    Re: HPDI LU lube specs? (Rich Z)

    Thanks Rich.. who makes LU lube that is blueish in color?
    Old Boat - 2005 520DVX 2011 Merc 225 Pro XS, HDS 8 and 9 Touch, Bobs JP, 25p Tempest

    Old Boat - 2018 Z520C Cup Package, 112 Ultrex, HDS 9 and 12 Carbon, Powerpoles, Merc 250 Pro XS, 25p Fury

    Current - 2019 Z520C Cup 112 Ultrex, 4 Stroke 250 Pro XS Merc, Slidemaster JP, Powerpoles 23p Fury

  6. Banned
    Join Date
    Jun 2004
    Location
    Apex, NC
    Posts
    4,828
    #6

    Re: HPDI LU lube specs? (HAWKHPDI)

    I use merc which is bluish/greene and I think the old OMC was blue. Not sure about Yam or BRP, never used any of their oils.

  7. Member
    Join Date
    Feb 2012
    Location
    Mesquite
    Posts
    1
    #7

    Re: HPDI LU lube specs? (HAWKHPDI)

    My mechanic filled my LU with Merc Hi Perf lube. It is bluish-green..i know this b/c when I looked at my boat today, there was a puddle of oil on the concrete floor. They didnt tighten the top hole plug. Good thing the issue was visible and could be corrected in order to avoid disaster!

Similar Threads

  1. Replies: 8
    Last Post: 02-16-2012, 06:28 PM
  2. Torque specs for HPDI heads
    By aggieangler03 in forum Yamaha Motors
    Replies: 2
    Last Post: 04-08-2010, 07:45 AM
  3. 2004 225 HPDI Spark Plug Torque specs
    By TexasZX225 in forum Yamaha Motors
    Replies: 2
    Last Post: 06-26-2009, 01:48 AM
  4. 05 300 hpdi gear lube capacity
    By MIKEinGA in forum Yamaha Motors
    Replies: 4
    Last Post: 01-29-2009, 04:09 AM
  5. Torqu specs for plugs on 250 HPDI?
    By chris c in forum Yamaha Motors
    Replies: 2
    Last Post: 02-09-2007, 09:47 AM