Is this a problem with the 300s...my buddies is bent about 1/8 .never hit anything just a little wobble.
Is this a problem with the 300s...my buddies is bent about 1/8 .never hit anything just a little wobble.
Not sure how it can bend w/o hitting anything, unless it's cracked and ready to come off... Better look before you loose a prop with it.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
It s bent, this is the one mark just did the prop for(t1) by the way is a work of art,but my buddy asked to have the hub checked too so he did said it was fine...we stick the prop on I
said holy cow.its bent about 1/16 to a 1/8 th.....never hit anything....just wondering if that 300 needs a fat shaft like the merc.
Is the hub/barrel moving or the center of the shaft when you spin it?
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Yeah guys. Check our website for the rundown, or give Jon a call here. We have a Heavy Duty propshaft for the Yamaha HPDI and SHO lower units.
Reply With Quote
.jpg)
