Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Mar 2009
    Location
    Columbus, Ms
    Posts
    139

    got a question for a yammi guy or gal

    Here it goes. I have gotten rid of my mercury and I have a good deal with a 06 Yamaha HPDI 250. Its not the VMax. What is the difference between the regular HPDI and the Vmax. The HPDI has a 20 in shaft. Thanks for the help

  2. Member mullamaster's Avatar
    Join Date
    Jun 2008
    Location
    Gippsland Lakes
    Posts
    349
    #2

    Re: got a question for a yammi guy or gal (gunther57)

    If it's not a Vmax then it's probably a 4 stroke as they are also referred to as HPDI
    _________________________________________________
    210 Blazer 250hpdi phase III

  3. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    65,407
    #3

    Re: got a question for a yammi guy or gal (gunther57)

    The compression ratio is a little more on the non v-max HPDI, I think the gear ratio is 1.81 on the non v-max HPDI as well.. My catalog is not showing the 20 in LU offered... It does show a 25 and a 30 inch LU.. The v-max comes only on the 20 inch LU.

    Both motors were new in 2003

    PS: The 4 strokes are not considered an HPDI....


    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  4. Member
    Join Date
    Mar 2009
    Location
    Columbus, Ms
    Posts
    139
    #4

    Re: got a question for a yammi guy or gal (21XDC)

    The dealer i am getting it from put a vmax shaft on it. I am picking it up tomorrow. I can't wait to see the difference my boat will be from 200 to a 250

  5. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    65,407
    #5

    Re: got a question for a yammi guy or gal (gunther57)

    What motor did the LU come from? They have different gear ratios.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  6. Member
    Join Date
    Mar 2009
    Location
    Columbus, Ms
    Posts
    139
    #6

    Re: got a question for a yammi guy or gal (21XDC)

    He ordered a vmax lower. The gears will be vmax gears but all the other will be HDPI. He told me all the parts are the same and line up. The guy that helped me get the deal has the HDPI motor on a vmax. I guess they both have the same bolt patterns. I am not a mechanic, but these guys do it with all the motors they buy.

  7. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    65,407
    #7

    Re: got a question for a yammi guy or gal (gunther57)

    Yes.. The bolts line up... But different gear ratios are offered in the 200-300 v-max.. Makes a difference in prop choices.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  8. Member
    Join Date
    Jan 2010
    Location
    Piedmont, SC
    Posts
    283
    #8
    I had a 2 stroke 200 just like that one in the picture. I was told it was the salt water version?? It seemed to be a little slower than my friends with Vmax's but I sure got good gas mileage.
    britt

Similar Threads

  1. 07 Yammi 225 4 stroke
    By farmrbuc in forum Yamaha Motors
    Replies: 1
    Last Post: 07-28-2011, 09:41 AM
  2. Yammi 90?
    By qwkdrwmgw in forum Yamaha Motors
    Replies: 4
    Last Post: 03-09-2011, 03:11 PM
  3. Yammi SHO UPDATE
    By DLAB in forum Louisiana Fishing
    Replies: 30
    Last Post: 07-27-2010, 07:04 PM
  4. prop for 250 yammi
    By 985ron in forum Skeeter Boats
    Replies: 2
    Last Post: 09-02-2009, 12:51 PM