Does anyone know if you can buy lower unit paint too repaint skag on hpdi Yamaha?
Does anyone know if you can buy lower unit paint too repaint skag on hpdi Yamaha?
198 CX 225 Yamaha
I just painted my hpdi cover,i used a automotive , dupont chomeabase,they match it with a mercieds (spell check) color it was pretty close.
Here are both the color numbers that I have used to paint parts of my outboard.
DBC 34880 Bluish gray met this is a Toyota color.
DBC 37617 Carbon Schwarz Mica I think this is a BMW color.
The second one is the lower unit color.
Thses are base coat clear coat numbers. I think if you go to an automotive paint supply store they can use these numbers to mix up an acrylic enamel. They can put that in a spray can for you. You could use this if you only want to paint a small area like the skeg only.
If you want to paint the whole piece then you can use the numbers above and clear over it.
There is also a GM paint number that matches the lower unit very well I am not sure what it is but if you go this route you can buy a spray can of touch up paint at walmart. Do a search on this subject to find that GM number. I think its a dupli-color #501
http://WWW.COLORRITE.COM They have Yamaha motor matching paint in touch up, spray and cans.....
2008 Ranger Comanche Z20/225 Yami HPDI
Thanks so much guys,![]()
knew someone would know!
198 CX 225 Yamaha
That colorrite paint is a three part system. To me its expensive for what you get when you can do it another way
If you can find it, DupliColor GM505 -Blue Metallic is a really good match.