has anyone eles had some blackish goo come out of there tube when they changed the water presure gadge........WTF
my water pressure is very erratic and the old gadge was to .some times i wil get 25 psi and the next 15 to 16 psi ............ aaaaaaaarrrrrrrrrgggggggggg
take the line loose from the head on the motor and then loose from the gage and blow it out with an air hose.
were would that spot on da motor be located????????
Look on the drivers side of the motor right on top and you will see a small black hose that goes to the front. It will be connected to a fitting in the top of the head.
Reply With Quote
