Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Sep 2009
    Location
    Branson
    Posts
    403

    Need help finding prop for my 225hpdi

    I have an 06 Z20 with a 225hpdi. I have no jackplate and cannot have one and still fit in the garage. I am only turning 5350rpms at 64mph with 2 people and a tourny load. I have a 25ti prop on now and was thinking of going to a 24pitch prop to get the rpms up alittle. What prop do you guys run or recommend.

  2. Member
    Join Date
    Jan 2006
    Location
    Ottawa, Ontario, Canada
    Posts
    1,350
    #2

    Re: Need help finding prop for my 225hpdi (get5fast)

    I run a T1-27P at about 5600-5700 rpms... on my Skeeter ZX225 the best i've run is 72mph although i'll conistantly get 70.5-71mph.

    With a T1-25P I turn 6000rpm but could only get 68. something out of it so i decided the 27P was for me and left it at that. I didn't play with the setup much more after that but now we're back out on the water up here in canada i've raised the motor another 1/4" just to see if there's any improvement... so i'm not quite done tweaking just yet..

    Oh and my water pressure usually runs at about 22lbs.

    Current: 2006 ~ 20i ~ 250 HPDI ~ T1-25p
    Previous: 2005 ~ ZX 225 ~ 250 HPDI Phase III - TXP 26p

Similar Threads

  1. 2011 PII with 200 ProXs, finding the right prop.
    By BCBandit in forum BassCat Boats
    Replies: 14
    Last Post: 01-30-2012, 04:47 AM
  2. Finding the right prop.
    By MTSUBASSFISHERMAN in forum Stratos/Javelin Boats
    Replies: 13
    Last Post: 01-19-2012, 03:05 PM
  3. Trouble finding prop
    By zip in forum Blazer Boats
    Replies: 8
    Last Post: 07-23-2010, 07:00 AM
  4. finding right prop
    By jayjay68 in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 11-11-2009, 05:22 PM
  5. 07 225HPDI prop shaft
    By KHill3611 in forum Yamaha Motors
    Replies: 0
    Last Post: 03-26-2009, 05:37 PM