Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Jan 2005
    Location
    Scottsboro, Al
    Posts
    5,127

    Rusty, Can You Help?

    I just put money down on a 2001 200 HP FICHT Ram. The engine did not come with a prop. It will be pushing a Ranger R93 2001. I also have the serial numbers for the engine:
    Model- E200fpl9sh the 9 might be a 5 or an S
    serial #G04857240
    built 03/2000
    Also, It would appear that the lower unit has been replaced due to paint that does not match. Lower units can be replaced for any reason but I wanted you to know.
    Any help you can give me would be greatly appreciateed.
    Thanks, Travi

  2. Member
    Join Date
    May 2004
    Location
    Nashville
    Posts
    11,165
    #2

    Re: Rusty, Can You Help? (Travi)

    This motor was sold to a MR. Englum in Paris IL on 5-31-00.
    10-3-01 the vapor separator was replaced.
    10-10-01 the update (strap kit) was installed.
    3-27-02 the EMM was replaced.
    7-18-02 the gear case was replaced.


    Hope this helps.

  3. Member
    Join Date
    Jan 2005
    Location
    Scottsboro, Al
    Posts
    5,127
    #3

    Re: Rusty, Can You Help? (RUSTY63)

    Rusty, thanks for the info.. So is that good or bad?

  4. Member
    Join Date
    May 2004
    Location
    Nashville
    Posts
    11,165
    #4

    Re: Rusty, Can You Help? (Travi)

    That is good.

  5. Member
    Join Date
    Jan 2005
    Location
    Scottsboro, Al
    Posts
    5,127
    #5

    Re: Rusty, Can You Help? (RUSTY63)

    Thanks rusty . do you have any thought on what prop I should put on the moter and whare to get one?

  6. Member
    Join Date
    May 2004
    Location
    Nashville
    Posts
    11,165
    #6

    Re: Rusty, Can You Help? (Travi)

    The question about where to buy a prop.........Might I suggest the prop forum, there is a Man there that does incredible work with props.

Similar Threads

  1. Rusty
    By DJ from MN in forum Evinrude/Johnson Motors
    Replies: 29
    Last Post: 07-29-2007, 05:13 AM
  2. Rusty
    By Kbass in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 05-26-2006, 03:35 AM
  3. Hey Rusty:
    By Wayne S in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 06-27-2005, 06:52 PM
  4. Rusty
    By 302w in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 06-27-2005, 06:45 PM
  5. Hey Rusty, got a ??
    By Hutch in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 06-27-2005, 09:01 AM