225 PSI Gauge Link?

[TROPHYHUNTER1979]

I received the gauge, adapter, tubing, etc. to install on a 2000 225 VMax. Does anyone have a pic or link as to where the adapter is located? Anything to look out for?

Thanks,
David

[mark Z21]

I gave up, looked everywhere for the adapter, in the end I drilled and taped with a 1/4" npt pipe thread tap, the extra pad on the motor right next to the plug the instructions tell you to remove/replace, I'll take a pic in a moment and post, it wasn't hard, just use alot of grease on the tap, and it will collect the saving so they don't get in the water ways



Modified by mark sl210 at 4:08 PM 3/13/2008

[mark Z21]

the plastic flywheele cover just pulls off


your adapter should fit where the silver bolt is in the second photo



Modified by mark sl210 at 4:08 PM 3/13/2008

[TROPHYHUNTER1979]

Mark,

Thanks for the help and pics. Which silver bolt are you referring to?

Thanks Again,
David

[mark Z21]

the one with the red rubber washer under it



Modified by mark sl210 at 4:07 PM 3/13/2008