Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Oct 2006
    Location
    Fort Lauderdale
    Posts
    2

    200hp salt water66 Power trip not working

    Hi every one!!

    just got a boat, Grady White 25 1990 with 2001 Yamahas 200 hp saltwater 66

    On engine trips up and down with out any issues, but the right one is not triming. I can hear the motor going but the engine does not move.

    Can anyone give me a couple of ideas before I take it to the shop??

    Thank for the help!!!

  2. Member kk4iz's Avatar
    Join Date
    Jun 2004
    Location
    Clanton, AL
    Posts
    4,352
    #2

    Re: 200hp salt water66 Power trip not working (Ernie)

    check your oil level for the trim. It should be in your manual, if you don't have go to http://www.yamahapubs.com/html/index.html they should have a copy you can look at on line.


    12 lbs 9 oz caught on 4/28/1975 Lake Eufaula

  3. Member
    Join Date
    Oct 2006
    Location
    Fort Lauderdale
    Posts
    2
    #3

    Re: 200hp salt water66 Power trip not working (kk4iz)

    Thanks for the help!

    It turned out that there was water in the fluid. I flushed it and it works fine.

    Thanks again!

Similar Threads

  1. Power trim /tilt stopped working now working
    By Fish4fun24 in forum Mercury - 2.0/ 2.4/ 2.5 Liter High Performance
    Replies: 1
    Last Post: 09-04-2011, 06:00 AM
  2. Trim Switch not working - 99 200hp Optimax
    By Drew_8899 in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 2
    Last Post: 05-16-2011, 06:29 PM
  3. power trim quit working???
    By catch5nRide in forum Bullet Boats
    Replies: 2
    Last Post: 01-09-2011, 04:16 AM
  4. E-TEC 60 Power Trim Stopped Working
    By jaroush in forum Evinrude/Johnson Motors
    Replies: 0
    Last Post: 05-25-2009, 07:22 AM
  5. power pack for 200hp johnson
    By keithc in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 10-08-2006, 04:15 PM