Hey guys i am replacing my fuel hose that runs from my tank to my motor. Motor is a 89' 2.4L 200hp, just wondering what size fuel hose is standard to use?
Thanks in advance!
Hey guys i am replacing my fuel hose that runs from my tank to my motor. Motor is a 89' 2.4L 200hp, just wondering what size fuel hose is standard to use?
Thanks in advance!
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by BigStickFishing »</td></tr><tr><td class="quote">Hey guys i am replacing my fuel hose that runs from my tank to my motor. Motor is a 89' 2.4L 200hp, just wondering what size fuel hose is standard to use?
Thanks in advance!
</td></tr></table>
On mine (1999 200EFI) Mr. Don @ European Marine hooked me up with 5/16" from the primer bulb to the motor and all the lines on the motor (i.e. from fuel pump to fuel filter / water separator, to the VST, etc).
Normally, 3/8" from the tank to the bulb, 5/16" from the bulb to the engine.
Recommend you utilize ONLY OEM Mercury/Quicksilver, EPA approved, Low-Permeation fuel line.
Measure yours out.... Sherm @ Sherm's Marine (or I) will be happy to assist you.
Email or Phone are the BEST means of contacting the Parts Department(s)
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Reply With Quote
